To make sure your measurments are not wrong, please follow these instructions.
Pick your desired mount or scroll below to get started
Use a metal measuring tape to take all measurements.
Take all your measurements at 1/8 of an inch.
Measure twice to avoid errors.
Measure from left to right in 3 positions (top, middle, bottom). Take the smallest measurement.
Measure from top to bottom in 3 positions (left, center, right). Take the largest measurement.
Do not make any deductions when you are measuring. The manufacturer will be sure to make them for a perfect fit.
For zebra and roller blinds the cassette, valence, headrail or roller will be the same width as the measurement given and the fabric will be shortened about 1/2 an inch on each side.
Use a metal measuring tape to take all measurements.
Take all your measurements at 1/8 of an inch.
Measure twice to avoid errors.
Give the measurements of the space you want to cover from left to right.
Give the measurements of the space you want to cover from top to bottom.
The width and height measurement should always include the cassette, valence, headrail or roller.
The cassette, valence, headrail or roller will be the same width as the measurement given and the fabric will be shortened about 1/2 an inch on each side, which is why, for example, if the space to be covered is 60" in width, it is recommended to order 64" (or 2" extra on each side) to ensure that the entire window frame is covered, preventing any light from penetrating through any gaps.
We work closely with our clients to deliver the best and easiest experience on window blinds.
Always use a metal measuring tape to take all measurements. This ensures accuracy and consistency throughout the measuring process.
Take all your measurements to 1/8 of an inch for optimal accuracy. Always measure twice to avoid errors and ensure you get the most precise measurements possible.
For width: Measure from left to right in 3 positions (top, middle, bottom) and take the smallest measurement. For height: Measure from top to bottom in 3 positions (left, center, right) and take the largest measurement.
No, do not make any deductions when you are measuring. The manufacturer will be sure to make them for a perfect fit. Simply provide the exact measurements you take.
For zebra and roller blinds, the fabric will be shortened about 1/2 inch on each side. To ensure full window frame coverage and prevent light gaps, it’s recommended to order 2 inches extra on each side. For example, if your space is 60″ wide, order 64″ to guarantee complete coverage.
